Fabrikant: Highsider Referentie: 208-200
Highsider Lichtsensor Switch E-Box Type-1
€ 99,95
Incl. BTW
Vraag om prijs of meer informatie
close
3-5 werkdagen
Op vooraad magazijn Duitsland
Beschrijving
HIGHSIDER PW E-BOX TYPE 1, for DRL switching via light sensor.
For automatic switching between daytime running light and low beam.
The HIGHSIDER PW E-BOX TYPE 1 detects when it gets dark or bright and then automatically switches the low beam on and off the daytime running light at the same time (or vice versa).
Additionally equipped (optionally switchable) is the so-called function. This makes it possible to have the daytime running light actively lit for a further 30 seconds after the motorcycle has been switched off in the dark.
No switch is required.
Dimensions:
Height: 16 mm
Width: 56.5 mm
Width with mounting brackets: 75 mm
Length: 48 mm
Fastening brackets: 3 mm x 11 mm (oblong hole)
Weight: 46 g
Cable length: 400 mm
Cable length: 600 mm (total)
Connections:
purple/black cable = high beam IN
yellow/green cable = parking light IN
black cable = ground IN (-)
red cable = supply voltage IN (+)
blue cable = low beam OUT
black cable = ground OUT (-))
Pink cable = Parking light OUT
Orange cable = Low beam IN
Grey cable = Programming cable
Green cable = High beam OUT
Brown cable = Daytime running light (TFL)
Black cable = Ground OUT (-))
White cable = TFL Control lamp OUT
4 pole plug for light sensor
delivered as standard:
HIGHSIDER PW E-BOX TYPE 1
Cable set
Light sensor
Instruction manual
Tip:
A mounting tutorial is available on YouTube in our channel (HIGHSIDER Tips & Tricks). Link:
https://www.youtube.com/watch?v
For automatic switching between daytime running light and low beam.
The HIGHSIDER PW E-BOX TYPE 1 detects when it gets dark or bright and then automatically switches the low beam on and off the daytime running light at the same time (or vice versa).
Additionally equipped (optionally switchable) is the so-called function. This makes it possible to have the daytime running light actively lit for a further 30 seconds after the motorcycle has been switched off in the dark.
No switch is required.
Dimensions:
Height: 16 mm
Width: 56.5 mm
Width with mounting brackets: 75 mm
Length: 48 mm
Fastening brackets: 3 mm x 11 mm (oblong hole)
Weight: 46 g
Cable length: 400 mm
Cable length: 600 mm (total)
Connections:
purple/black cable = high beam IN
yellow/green cable = parking light IN
black cable = ground IN (-)
red cable = supply voltage IN (+)
blue cable = low beam OUT
black cable = ground OUT (-))
Pink cable = Parking light OUT
Orange cable = Low beam IN
Grey cable = Programming cable
Green cable = High beam OUT
Brown cable = Daytime running light (TFL)
Black cable = Ground OUT (-))
White cable = TFL Control lamp OUT
4 pole plug for light sensor
delivered as standard:
HIGHSIDER PW E-BOX TYPE 1
Cable set
Light sensor
Instruction manual
Tip:
A mounting tutorial is available on YouTube in our channel (HIGHSIDER Tips & Tricks). Link:
https://www.youtube.com/watch?v
0/5
chat
Commentaar (0)
error Je beoordelingswaardering kan niet worden verzonden
feedback Rapporteer reactie
Ben je zeker dat u deze opmerking wil rapporteren?
fa-envelope Melding verzonden
Je opmerking is ingediend en zal door een beheerder worden behandeld.
error Je opmerking kan niet worden verzonden
Schrijf je recensie
fa-envelope Beoordeling verstuurd
Je beoordeling is toegevoegd en wordt beschikbaar zodra deze is goedgekeurd.
error Je beoordeling kan niet worden verzonden