Fabrikant: Highsider Referentie: 161-314
Highsider Stuurgewichten Tetra zwart
€ 29,95
Incl. BTW
Vraag om prijs of meer informatie
close
3-5 werkdagen
Op vooraad magazijn Duitsland
Beschrijving
HIGHSIDER handlebar weights TETRA, bead blasted black silk matt surface
With these striking handlebar ends with handlebar mirror mount you can design your bike in detail according to your ideas. These end pieces serve as a receptacle for all HIGHSIDER & SHIN YO handlebar end mirrors with handlebar outside clamping. In addition, bar ends serve to reduce disturbing vibrations on the handlebars. Thanks to the clamping system with different sleeves, it is universally suitable for 7/8 (�22 mm), 1 inch (�25.4 mm) or X-Bar (�28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm.
Our accessory TIP:
Excellent in combination with the distinctive VICTORY-BLAST handlebar end mirrors from our own company. If you do want to change back to handlebar mirrors, you can easily use the optionally available color rings instead of a handlebar end mirror and thus set color accents. The colour rings are simply pushed over the end of the handlebars and fastened with the grub screw located on the ring.
Dimensions
Handlebar weight:
Diameter: 34,4 mm
Width: 20 mm
Support for bar end mirror with outside clamping:
Diameter: 29,90 mm
Width: 12 mm
Supply includes: 1 pair incl.
each 2 clamping sleeves with � 12 and 16 mm
each 2 spacer sleeves with � 14, 18 and 21 mm
2 x M6 central bolts
2 x M6 conical nuts
>NOTE:
For handlebar ends with clamping system the ends of the handlebars must not be blocked by threaded inserts or similar.
handlebar ends do not have to be approved, therefore they do not need any test marks, certificates or ABEs.
With these striking handlebar ends with handlebar mirror mount you can design your bike in detail according to your ideas. These end pieces serve as a receptacle for all HIGHSIDER & SHIN YO handlebar end mirrors with handlebar outside clamping. In addition, bar ends serve to reduce disturbing vibrations on the handlebars. Thanks to the clamping system with different sleeves, it is universally suitable for 7/8 (�22 mm), 1 inch (�25.4 mm) or X-Bar (�28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm.
Our accessory TIP:
Excellent in combination with the distinctive VICTORY-BLAST handlebar end mirrors from our own company. If you do want to change back to handlebar mirrors, you can easily use the optionally available color rings instead of a handlebar end mirror and thus set color accents. The colour rings are simply pushed over the end of the handlebars and fastened with the grub screw located on the ring.
Dimensions
Handlebar weight:
Diameter: 34,4 mm
Width: 20 mm
Support for bar end mirror with outside clamping:
Diameter: 29,90 mm
Width: 12 mm
Supply includes: 1 pair incl.
each 2 clamping sleeves with � 12 and 16 mm
each 2 spacer sleeves with � 14, 18 and 21 mm
2 x M6 central bolts
2 x M6 conical nuts
>NOTE:
For handlebar ends with clamping system the ends of the handlebars must not be blocked by threaded inserts or similar.
handlebar ends do not have to be approved, therefore they do not need any test marks, certificates or ABEs.
0/5
chat
Commentaar (0)
error Je beoordelingswaardering kan niet worden verzonden
feedback Rapporteer reactie
Ben je zeker dat u deze opmerking wil rapporteren?
fa-envelope Melding verzonden
Je opmerking is ingediend en zal door een beheerder worden behandeld.
error Je opmerking kan niet worden verzonden
Schrijf je recensie
fa-envelope Beoordeling verstuurd
Je beoordeling is toegevoegd en wordt beschikbaar zodra deze is goedgekeurd.
error Je beoordeling kan niet worden verzonden